Seacoast Heat Shrink Tubing
Seacoast Electronic Distributors
** Specialists in Heat Shrink Tubing and accessories

Phone: (978) 236-1050 - Fax: (978) 236-1075
Home

Heat
Shrink
Tubing


Hot
Stamping


Cable
Ties


Expando
Sleeving


Teflon/FEP
Sleeving


Molded
Shapes


Other
Products


Value
Added
Services


Line
Card


Info
Request
Form


 Heat Shrink Tubing

heat shrink tubes

 Heat Shrink Tubing can be used for many different applications and has a wide variety of uses, each unique for it's purpose. Because of the many different applications, there are many different heat shrink tubings which will meet the demands of each individual application.

The chart below has a cross reference chart of the most common types of heat shrink tubing and sleeving. There are many other types which our technical service department will be happy to discuss with you.

CODE Characteristics Shrink Ratio Specifications MIL-I-23053 Continuous Operating Temperature
PM-GP-3 All purpose insulation 2:1 /5 class 1,2,3 -55 to 135 C
PM-DW-3 Thick adhesive inner wall 3:1 /4 class 3 -55 to 110 C
PM-DW-2 Adhesive lined 2:1 /4 class 2 -55 to 110 C
PM-DW-1 Encapsulant sealant lined 2:1 /4 class 1 -55 to 110 C
PM-FLORO-8 High temperature, abrasion resistant, semi-rigid 2:1 /8 class 1 -55 to 175 C
PM-FLORO-18 flame resistant,flexible fluoropolymer 2:1 /18 Class 1 -55 to 175 C
PM-150-18 High-performance,flame resistant,flexible fluoropolymer 2:1 /18 Class 2 -55 to 150 C
PM-TW Flexible Polyolefin Thin Wall 2:1 n/a -55 to 125 C
PM-HT(BLACK) High Temperature Flexible Fluid Resistant, Thin Wall 2:1 /13, /18 class 3 -70 to 200 C
PM-HT(CLEAR) High Temperature Flexible Fluid Resistant, Thin Wall 2:1 /13, /18 class 3 -70 to 200 C
PM-NEO-1 Abrasion resistant 2:1 /1 class 1 -75 to 120 C
PM-NEO-16 mechanically strong 2:2 /16 -75 to 120 C
PM-VITON Solvent resistant, high temperature 2:1 /13 -40 to 200 C
PM-NH(TW) flame resistant, halogen free 2:1 n/a -55 to 125 C
PM-TEFLON Very high temperature insulation, abrasion resistant 2:1 & 4:1 /11 class 1,2 260 C
PM-FEP Excellent physical properties 1.6:1 & 1.3:1 /12 class 1,2 204 C
PM-PVC-VINYL Low temperature 2:1 /2 class 1,2 -20 to 105 C

Cross Reference of Other Vendors
CODE SUMITOMO ALPHA RAYCHEM 3M
PM-GP-3 B2 FIT-221 RNF-100 FP-301
PM-DW-3 W3B2 FIT-321 ATUM EPS-300
PM-DW-2 O2B2 FIT-750 TAT EPS-200
PM-DW-1 W5DL FIT-300 SCL MW
PM-FLORO-8 K2 FIT-350 KYNARTM* KYNARTM*
PM-TW F4 - Versa-Thin -
PM-HTFR KH350 - RT555 -
PM-NEO-1 R-10 FIT-600 NT NST
PM-NEO-16 R-120 - DR-25 -
PM-VITON* VITON® FIT-650 VITON® VITON®
PM-TEFLON TFE FIT-500 TFE TFE
PM-FEP FEP FIT-400 FEP FEP
PM-PVC-VINYL V PVC V PVC

* Note: Viton® is a registered trademark of DuPont Dow Elastomers.
KynarTM is a registered trademark of the Atochem Corporation.

Give us a call at 978-236-1050 for more details!


A Little History:

Heat Shrink Tubing-Radiation Chemistry

The unique Heat Shrinkable properties result from the exposure of special thermoplastic formulation to high intensities of radiation.

With the advent of atomic energy after WWII, the important discovery was made that the exposure of some plastic materials to high energy penetrating radiation can cause the permanent cross-linking of inter-molecular joining of adjacent molecules. Once cross-linking has been accomplished, the material will not melt or flow at any temperature. Heat shrinkable products have perfect plastic memory and are supplied in an expanded condition. Upon the application of a heat source (heat gun) the tubing will shrink and grasp tightly to the object over which it has been placed, such as a wire, lug, terminal or connector. Heat shrink tubing acquires this special plastic memory feature as a result of radiation cross linking.

Heat Shrink Tubing | Hot Stamping | Other Products | Value Added Services | Line Card | Info Requests


 Email Us!


Seacoast Electronic Distributors
17 River Street
Beverly, MA
USA   01915
Phone: (978) 236-1050   Fax: (978) 236-1075

Copyright 1997-2003 by Seacoast. All rights reserved. Reproduction in whole or in part in any form or medium without the express written permission prohibited.