** Specialists in Heat Shrink Tubing and accessories Phone: (978) 236-1050 - Fax: (978) 236-1075 |
Ratio | UL Specs | MIL Specs | |
---|---|---|---|
T.F.E. - Polytetrafluoroethylene | 2:1 and 4:1 Ratio |
3M/ECC | Alpha | Raychem | Sumitomo |
---|---|---|---|
n/a | FIT-500 | TFE | n/a |
Description | Usages | Operating Temp | Shrink Temp | Packaging |
---|---|---|---|---|
Possesses the lowest coefficient of friction of any known solid and is used widely because of its anti-stick properties which allows easy cleaning. | Excellent insulating material. Has the benefit of resisting melt-off by soldering irons when making terminations. It is resistant to virtually all corrosive chemicals. Its dielectric properties favor it for electronic and electrical service. | 260 C | 327 C | Varies according to size |
SIZE |
EXPANDED Inside Diameter Before Shrinking |
RECOVERED Inside Diameter After Shrinking |
Post Shrink Wall Thickness |
Full Spool Length |
---|
AWG | mm | inches | mm | inches | mm | inches | in feet |
---|---|---|---|---|---|---|---|
16 | 0.093 | 0.061 | 0.016/0.003 | ||||
15 | 0.110 | 0.067 | 0.016/0.003 | ||||
14 | 0.120 | 0.072 | 0.016/0.003 | ||||
13 | 0.140 | 0.080 | 0.016/0.003 | ||||
12 | 0.150 | 0.089 | 0.016/0.003 | ||||
11 | 0.170 | 0.101 | 0.016/0.003 | ||||
10 | 0.191 | 0.112 | 0.016/0.003 | ||||
9 | 0.205 | 0.124 | 0.020/0.004 | ||||
8 | 0.240 | 0.141 | 0.020/0.004 | ||||
7 | 0.270 | 0.158 | 0.020/0.004 | ||||
6 | 0.302 | 0.178 | 0.020/0.004 | ||||
5 | 0.320 | 0.198 | 0.020/0.004 | ||||
4 | 0.370 | 0.224 | 0.020/0.004 | ||||
3 | 0.390 | 0.249 | 0.020/0.004 | ||||
2 | 0.430 | 0.278 | 0.020/0.004 | ||||
1 | 0.450 | 0.311 | 0.020/0.004 | ||||
0 | 0.470 | 0.347 | 0.020/0.004 |
SIZE |
EXPANDED Inside Diameter Before Shrinking |
RECOVERED Inside Diameter After Shrinking |
Post Shrink Wall Thickness |
Full Spool Length |
---|
Frac | mm | inches | mm | inches | mm | inches | in feet |
---|---|---|---|---|---|---|---|
1/8 | 0.125 | 0.037 | 0.010/0.002 | ||||
3/16 | 0.188 | 0.050 | 0.012/0.003 | ||||
1/4 | 0.250 | 0.063 | 0.012/0.003 | ||||
3/8 | 0.375 | 0.096 | 0.012/0.003 | ||||
7/16 | 0.438 | 0.112 | 0.015/0.004 | ||||
1/2 | 0.500 | 0.144 | 0.015/0.004 | ||||
3/4 | 0.750 | 0.224 | 0.015/0.004 |