** Specialists in Heat Shrink Tubing and accessories
Phone: (978) 236-1050 - Fax: (978) 236-1075
| ** Specialists in Heat Shrink Tubing and accessories Phone: (978) 236-1050 - Fax: (978) 236-1075 |
| Ratio | UL Specs | MIL Specs | |
|---|---|---|---|
| Withstands High Tems and Abrasion | 2 to 1 Ratio | UL-224 150 C, 600V | MIL-D%L-23053/8 MIL DTL-23053/18, Class 1 |
| 3M/ECC | Alpha | Raychem | Sumitomo |
|---|---|---|---|
| n/a | n/a | n/a | K2 |
| Description | Usages | Operating Temp | Shrink Temp | Packaging |
|---|---|---|---|---|
| Tough and abrasion resistant in mechanical environments. Has excellent properties for cut through and solvents. | Recommended for applications where the properties of standard Kynar are desirable but with the added benefits of flexibility, greater clarity, reduced shrink temperature and long continuous lengths. | -55 C to +175 C | 150 C | Spool |
| Property (units) | Test Method | Requirements |
|---|---|---|
| Tensile Strength (psi) | ASTM D638 | 3500 min |
| Elongation (%) | ASTM D638 | 200 min |
| Specific gravity | ASTM D792 | 2.0 max |
| Low temp. flex (-55 C) | MIL-DTL-23053 | No Cracking |
| Heat shock (275 C, 168 Hrs.) | MIL-DTL-23053 | No Cracking |
| Heat resistance (250 C, 168 Hrs.) El | ASTM D638 | 100 min |
| Secant modulus (psi) | ASTM D882 | 100000 max |
| Deformation (150 C, 1 hr) (%) | UL 224 | 50 max |
| Longitudinal change (%) | MIL-DTL-23053 | +10, -10 |
| Property (units) | Test Method | Requirements |
|---|---|---|
| Dielectric strength (volts/mil) | ASTM D876 | 400 min |
| Volume resistivity (ohm-cm) | ASTM D876 | 1.0 x 1011 |
| Property (units) | Test Method | Requirements |
|---|---|---|
| Copper Stability (180 C, 168 Hrs.) | UL 224 | 70% of unaged value |
| Water absorption (%) | ASTM D570 | 0.5 max |
| Fluid resistance (23 C, 24 Hrs.) Te | MIL-DTL-23053 | 2000 min |
| Flammability | UL 224 VW-1 | Pass |
| Vacuum Outgassing TML%CVCM% | ASTM E595 | 1.0 max, 0.1 max |